Discrete / batch
ERP for Furniture Manufacturers
Panel offcuts, edge trim and a finish that has to be right on the visible face. Costing here lives and dies on board utilisation.
- Stages mapped
- 7
- Quality checks
- 4
- Wastage rules
- 3
- Compliance items
- 3
Your process
The stages, already mapped.
Panel processing to assembly and finishing. These are the stages the template ships with — machines and checks included. Yours will differ in detail; that is configuration, not development.
- 1
Panel cutting
Beam-saw cutting per optimised cutlist
- Machines
- Beam saw
- Checked
- Dimensions, chipping
- 2
Edge banding
Apply and trim edge bands
- Machines
- Edge bander
- Checked
- Bond, finish
- 3
Drilling
CNC boring for fittings per program
- Machines
- CNC bore
- Checked
- Hole pattern gauge
- 4
Sanding
Surface prep for finishing
- Machines
- Wide-belt sander
- Checked
- Surface grade
- 5
Finishing / polish
PU/melamine finishing in booth
- Machines
- Spray booth
- Checked
- DFT, gloss
- 6
Assembly
Hardware fitting and unit assembly
- Machines
- Assembly line
- Checked
- Fitment checklist
- 7
Packing
Knock-down or assembled packing with hardware kits
- Machines
- Packing line
- Checked
- Kit completeness
What goes in
Boards, laminates, hardware
What comes out
Furniture SKUs / sets
Modular office furniture · Institutional seating · Custom interiors
Who is it for
Not all furniture manufacturers work the same way.
The template is the same; what it has to answer for is not. Find the one that sounds like you — if none of them do, say so on the call and we will tell you honestly whether this is the right fit.
Modular & office furniture makers
Panel optimisation, hardware kits and site-wise dispatch.
Bespoke joinery workshops
One-off jobs costed against a drawing and a site measure.
Volume furniture manufacturers
Repeat models, knock-down packing and dealer stock.
MANUPRIME AI
Ask it about this floor, in your own words.
The AI reads the same records this template creates — so on a furniture manufacturer floor the questions it can actually answer are the ones you already ask at the morning meeting.
Questions it answers here
- “Why has board yield moved this week?” — currently 86% in the demo data
- “Why has on-time delivery moved this week?” — currently 92% in the demo data
- “Why has rework % moved this week?” — currently 3.1% in the demo data
- “Where is my wastage going?” — panel offcuts, edge trim, costed back to the batch that caused it
- “What am I short of in the next 14 days?” — with the covering purchase order drafted for approval
And what it is not allowed to do
It shows its working, or it does not answer
It drafts. A person releases
It sees only what the person asking can see
Quality
What quality control looks like here.
Checks that hold a dispatch, at the frequency this trade actually inspects.
| Parameter | Method | Frequency |
|---|---|---|
| Panel dimensions | Tape/gauge | Per batch |
| Edge bond | Pull test | Per shift |
| Finish (gloss/DFT) | Gloss meter | Per booth lot |
| Load test (seating) | Static load rig | Per design lot |
Wastage and recovery
The part generic ERPs get wrong.
Most systems can only write material off. In this trade that is the difference between a costing you believe and one you argue with.
Rules that ship with this template
- Panel offcuts nested for smalls before scrap
- Edge-band trim standard 4%
- Hardware shortage reconciled per kit
What drives your cost per unit
- Board consumption per cutlist optimisation
- Finishing cost per m²
- Hardware kit cost per SKU
In short:Panel offcuts, edge trim.
Compliance
What this trade has to prove.
Configured, not bolted on afterwards — the records come out of the same transactions your floor is already entering.
On the dashboard
The numbers this plant is judged on.
Sample figures from the demo, so you can see the shape of what you would be looking at every morning.
- Board yield
- 86%
- On-time delivery
- 92%
- Rework %
- 3.1%
Illustrative values from the demo dataset, not a customer's figures.
Questions
Questions we get asked first.
Can it cost board utilisation?
Cutting records boards issued against panels produced, so utilisation and offcut percentage are visible per board type and per job.
Does it handle knock-down sets and hardware kits?
Yes. A set is a BOM of panels and a hardware kit, picked and packed as a unit, with a packing list that matches what the customer opens.
How is finishing rework tracked?
As a rework route with the defect reason, so polish and finish failures accumulate against the line rather than being re-done quietly.
See it running with Furniture Manufacturing data.
The demo opens with this trade's materials, machines, checks and reports already in place. No signup, nothing to install.